The GW Instek GPS 3030 Bench Power Supply from GW Instek is a GPS series single output 90W linear DC power supply with 3 digits 0.5″ digital LED display. It features overload and reverses polarity protection as well as high regulation and low ripple/noise that is maintained at 0.01%. The GW Instek GPT-9804 is an electrical safety test meter that does AC/DC withstanding, insulation resistance and grounded chassis check tests for products that will be UL or CE certified. I'd like to buy one of these for our production line and will pick this model for sure if there are any LabVIEW drivers already created for it.
| Status | supported |
|---|---|
| Source code | gwinstek-gpd |
| Channels | 2/3/4 |
| Voltage/current (CH1) | 0-30V / 0-3A |
| Voltage/current (CH2) | 0-30V / 0-3A |
| Voltage/current (CH3) | various |
| Voltage/current (CH4) | various |
| Connectivity | USB/serial |
| Features | memory save/recall, key lock |
| Website | gwinstek.com |
GWInstek is launching a new safety tester family, the GPT-9900 series, with 500VA maximum output capacity to the market. The family of four, including GPT-9904, GPT-9903, GPT-9902A and GPT-9901A, come joining the GPT-9800 series, which carries 200VA output capacity, to serve the market with higher power demands for the safety tests of. APS-1102A,GW Instek is a leading provider of Digital Storage Oscilloscope, Digital Oscilloscopes, Signal Source, Power Supply, DC Power Supply, Digital Meters, LCR Meters, safety testing, Hi-Pot Test(hipot test),Dielectric Breakdown Testing. The GDM-8261A LabVIEW driver is also available for free download. With this driver, the user is able to create a virtue instrument on the PC for the instrument control. With DMM-Viewer & LabVIEW driver, the GDM-8261A becomes a high value semi-auto ATE system.
The GW Instek GPD series are 2/3/4 channel programmable linear DC power supplies with USB/serial connectivity.
Devices
| Device | Channels | Voltage range | Current range | Power |
|---|---|---|---|---|
| GPD-2303S | 2 | 0-30 V, 0-30 V | 0-3 A, 0-3 A | 180 W |
| GPD-3303S | 3 | 0-30 V, 0-30 V, 2.5/3.3/5.0 V | 0-3 A, 0-3 A, 0-3 A | 195 W |
| GPD-4303S | 4 | 0-30 V, 0-30 V, 0-5 V or 5-10 V, 0-5 V | 0-3 A, 0-3 A, 0-3 A or 0-1 A, 0-1 A | 195 W |
| GPD-3303D | 3 | 0-30 V, 0-30 V, 2.5/3.3/5.0 V | 0-3 A, 0-3 A, 0-3 A | 195 W |
So far, only the GPD-2303S is supported and tested. Adding support for the other devices should be relatively easy for someone with hardware access, though. Patches welcome!
Includes control protocols for Pro Tools, Live, Logic, Final Cut Pro, and Soundtrack Pro. NOTE: This updated driver is only needed for users who want to use the new Logic plug-in for AlphaTrack. Otherwise it is unchanged from the v1.2 Mac driver. AlphaTrack Macintosh Installer v1.4.1. V1.4 2010-11-15 AlphaTrackOSX141.zip - 1.8MB. Includes full WDM audio and midi capabilities, as well as ASIO support for 32-bit and 64-bit applications. Note: This version is for 64-bit Windows XP and Vista only. WaveCenter/PCI Macintosh ASIO Driver. V1 2004-12-04 WCPCI1.0.hqx - 1,076KB. Documentation Chaining digital audio outputs in multiple GigaStudio systems. Frontier design sound cards & media devices driver.
Hardware
There was two hardware revisions (versions) of these units released. Model numbes did not change so it is difficult todetermine whether unit is the 'old' or 'new' hardware revision.However, at least on GPD-3303S there is slight change to unit front panels;older units have slight space in output jacks between 'CH1' and 'FIXED' channel, while newer units have even spacing.
It would appear that older hardware revision units have firmware version < v2.00, but this has not been confirmed (based on anecdotal evidence only).
Protocol
Fuzhou rockchip others driver download for windows xp. These units use SCPI like command protocol. However, units do not implement all mandatory SCPI commands.
There appears to be difference in the protocol between old and new hardware revision units.Output from STATUS? command differs:
Gw Instek Wikipedia
| Bit | New Units | Old Units |
|---|---|---|
| 0 | CH1 (0=CC, 1=CV) | |
| 1 | CH2 (0=Cc, 1=CV) | |
| 2,3 | Tracking (01=Independent, 11=Series, 10=Parallel) | |
| 4 | Beep (0=OFF, 1=ON) | |
| 5 | Output (0=OFF, 1=ON) | N/A |
| 6 | Baud (00=115200, 01=57600, 00=9600) | Output (0=OFF, 1=ON) |
| 7 | N/A | |
Example output to *STATUS? command:
Old units:
New units: Frontline test equipment driver download for windows 7.
Download Gw Instek Driver Updater
See the vendor user manual for more details.
Download Gw Instek Drivers
Resources
- Specification (PDF)
- Downloads (datasheet, user manuals, drivers, vendor software)
Gw Instek Psp 2010
Download Gw Instek Driver Manual