Gmc-i Messtechnik Port Devices Driver



The device is designed for class B contact measurements. It’s suitable for the performance of measurements at transilluminated and self-luminous surfaces. The silicon sensor included with the MAVO-MONITOR USB is color corrected – its spectral sensitivity is precisely matched to. Safety through Competence. Welcome to Gossen Metrawatt GmbH! With our brands GOSSEN METRAWATT and CAMILLE BAUER we have offered you innovative products and customized solutions to meet your challenges in the field of test and measurement - for more than 114 years. Note: On the IMB-usb the Windows device driver must be installed before opening the window ( see 4.3 ) Select the PC-Connection ( i.e. COM 1, USB or IMB-lan/wlan ) and after that as IBR-instrument the IMBus or as Ser-No. The serial number of your IMB-lan / IMB-wla connection module.

KMG - Force Testers for Doors and Gates
  • KMG-Lite Datasheet
  • Quick Reference Guide (German)
  • Force Measurement Guide
  • KMG-Lite Operating manual
  • KMG-Lite APP
  • KMG-2000-G Datasheet
  • KMG-2000-G Operating Manual
  • KMG-Software VD2005 Short Manual
  • KMG-Software VD2005 Additional Manual: PC Interface configuration
  • KMG-Software VD2005 V5.10.1 including USB-Driver
    Windows 7 compatible full version of the KMG-PC-Software. This package includes a USB-Driver,
    which is required for communication with KMG-2000-G – Devices.
  • Accuracy of force measuring devices – requirements and practice
    Fact sheet on the accuracy of force measurement according to EN 12445. (German)


Force and Pressure Measurement System CoboSafe


HEATDEC - Automated and contacless measurement of body temperature


GMG - Sliding Friction Testers
  • GMG-200 Datasheet
  • GMG-200 Operating Manual
  • Guidelines for professional associations (German)
  • Leaflet of the german statutory accident insurance about slip danger (German)

Hspa port devices driver download for windows 10 free.
Draytek usb devices driver download for windows 10. Do-it-auto port devices driver download.

FST/WST - Door/Gate Control Units
  • FST-75/150 brochure
  • FST-75/150 Operating Manual
  • WST-18 brochure
  • WST-18 Operating Manual


NxV - Emergency Power Supplies For Elevators
  • Emergency Power Supply NxV II – Installation and Operating Manual (German)


ADICOS - Advanced Discovery System
  • For detailed information about the ADICOS advanced fire detection system, please visit www.ADICOS.com.


Terms of Business


Remote-Support

METRAHIT„nEXTRA„nETECH„nESPECIAL„nEBASE
TRMS Digital Multimeters 3-349-454-03
3/11.08
GMC-I Messtechnik GmbH
DQS Certified per
DIN EN ISO 9001:2000
QUALITY MANAGEMENT SYSTEM
reg. no.1262
Calibration Certificate included
Applications
The instruments of the E- and high resolution series are extremely
rugged, reliable digital multimeters with housings made of impact
resistant ABS.
With a resolution of 60,000 counts and up to 26 different measuring
Messtechnik functions, they¡¦ve been developed for professional use.
Features
Three Connector Jacks with Automatic Blocking Sockets (ABS) *
All current ranges are implemented via a single connector jack
which prevents any possibility of operator error. Auto-ranging is
available in all current measuring ranges.
Also the automatic blocking sockets prevent incorrect connection
of the measurement cables, as well as selection of the wrong
measured values. Danger to the user, the instrument and the
device under test resulting from operator error is eliminated.
* Patented (patent no. DE 10 2005 062 624, US 7,439,725)
Overload Protection
The instrument is safeguarded for up to 1000 V in all measuring
functions by overload protection. Voltages of greater than 1000 V
and current of greater than 10 or 16 A are indicated acoustically.
Dangerous contact voltages are indicated when the 1 kHz lowpass
filter is activated.
The FUSE display appears at METRAHIT EXTRA and METRAHIT ETECH
instruments in order to indicate that the fuse for the current measuring
input has blown.
RMS Value with Distorted Waveshape
The utilized measuring method allows a waveshape
independent RMS measurement (TRMS AC and AC+DC) for
voltage and current (METRAHIT EXTRA up to 20 kHz).
Selectable Filter for V AC Measurement
A 1 kHz low-pass filter can be selected if required, for example to
measure the motor voltage at electronic frequency
converters. The input signal is checked by a voltage comparator
for dangerous voltages as long as the low-pass filter is
activated. A high-voltage symbol appears at the display if
dangerous voltage is present.
Measuring 5 V Square-Wave Signals with the METRAHIT EXTRA
This function allows to test circuits and transmission cables by
measuring the frequency and the duty cycle of pulses with amplitudes
of 2 to 5 V and frequencies of 100 Hz to 1 MHz.
Analog Scale for Quick Trend Display ¡V Bar Graph or Pointer
The analog scale (with additional negative range for zerofrequency
quantities) allows for faster recognition of measured
value fluctuation than is possible with a digital display.
The instrument can be switched back and forth between bar
graph and pointer display via the menu.
Automatic or Manual Measuring Range Selection
Measurement functions are selected by a rotary dial and a function
key. The measurement range selection is done automatically
according to the input signal. Manual measurement range selection
is possible via function key.
¡E Digital Hand-Held Multimeters with RMS Measurement
amongst other features including:
VAC TRMS, VAC+DC TRMS, VDC, Hz (V), Hz (A), ƒÇ, V , ¢XC/¢XF (TC)
¡E Resolution of 60,000 counts, can be changed to 6000 via the
menu, display illumination can be activated for difficult
lighting conditions
METRAHIT EBASE
¡E Current measurement via clamp current sensors:
The transformation factor is adjustable from 1 mV:1 mA to
1 mV:1 A and the factor is calculated for the display.
METRAHIT ETECH
¡E Direct Current measurement with increased accuracy and
Current measurement, via clamp current transformer and sensors
¡E Broad range capacitance measurement
METRAHIT EXTRA/ETECH/ESPECIAL
¡E Special low-impedance alternating voltage measurement (1 MƒÇ)
¡E 1 kHz / -3 dB low-pass filter can be activated
METRAHIT EXTRA
¡E Direct current measurement from 10 nA to 10 A, 16 A for short periods
¡E Temperature measurement with Pt100/Pt1000 resistance thermometer
¡E Broad range capacitance measurement
METRAHIT ESPECIAL
¡E Special instrument for the performance of measurements at
current transformer circuits
METRAHIT„nEXTRA„nETECH„nESPECIAL„nEBASE
TRMS Digital Multimeters
2 GMC-I Messtechnik GmbH
Measurement with current clamps and sensors
Current clamps and sensors are used for current measurements
without interrupting the circuit under test and for high currents
above 16 Amps. All E series multimeters offer convenient measurement
with current clamps.
The measured current value is automatically calculated for the
user with the help of the adjustable clamp factor.
Fast Acoustic Continuity Test
Testing for short circuit connection and circuit interruption is possible
with the selector switch in the position. The threshold
value for acoustic response can be set to 1, 10, 20 .. 500 ƒÇƒnin 10
Ohm steps.
Automatic Storage of Measured Values *
The DATA function automatically saves the digitally displayed measured
value after stabilisation in. Acoustic signaling is also used to
indicate whether the new measured value deviates from the initial reference
value by less or more than 0.1% of the measuring range.
* Patented
Min-Max Data Storage
Comparable to the slave-pointer function of an analog instrument,
the device saves the highest and lowest measured values after
the MIN/MAX function has been activated or reset. These
extreme values can be queried at the display.
Battery Charging Status ¡V Power Saving Circuit
The battery charging status is indicated by means of four symbols.
The device is switched off automatically if the measured value
remains unchanged for a period of between 10 and 59 minutes
(adjustable), and if none of the controls are activated during this
time.
Automatic shutdown can be deactivated by switching the
instrument to continuous operation.
The standby mode of the infrared interface can be switched off.
Protective Rubber Holster for Rugged Conditions
The instrument is protected against damage in the event of impacts
or dropping by means of a soft rubber holster with tilt stand and test
probe holder. The rubber material also assures that the instrument
does not slide if it is set up on a vibrating surface.
Infrared Data Interface
The device can be remotely configured, and momentary and
stored measurement data can be read out via the bidirectional
infrared interface. The USB X-TRA interface adapter and
METRAwin10 software are required (see accessories). Interface
protocol and device driver software for LabVIEWR (National
Instruments.) are available upon request.
DKD Calibration Certificate
Each multimeter is individually adjusted, subjected to final inspection
and calibrated. Adherence to the specification is confirmed
by means of the included DKD calibration certificate, which is
valid worldwide (recognized by EA and ILAC. If any type of DMM
is due to recalibration (recommended intervals: 1 to 3 years) the
multimeters can inexpensively recalibrated at the factory or at any
calibration laboratory.
Applicable Regulations and Standards
Functional overview
1) Alternating voltage measurement with specially reduced input impedance
2) 8 Mbit = 1024 kByte = 61,600 measured values, sampling rate adjustable from 0.1 seconds
to 9 hours
3) IP 65 available with the METRAHIT OUTDOOR model
Included
1 multimeter in HC20 hard case
1 pair of safety measurement cables (1.5 m) with 4 mm test
probes, 1000 V CAT III, 600 V CAT IV (KS17-2)
2 batteries, 1.5 V, type AA
1 condensed operating instructions, English/German
1 CD ROM, content: operating instructions in English and
German
1 DKD calibration certificate
1 protective rubber holster
Voluntary Manufacturer¡¦s Guarantee
24 months for materials and workmanship
1 to 3 years for calibration (depending upon application)ƒn
IEC/EN 61010, part
1:2001/VDE 0411-1:2002
Safety requirements for electrical equipment for
measurement, control and laboratory use
DIN EN 61326-1
VDE 0843-20-1
Electrical equipment for measurement, control and laboratory
use ¡V EMC requirements ¡V
Part 1: General requirements
DIN EN 60529
DIN VDE 0470, part 1
Test instruments and test procedures
¡V degrees of protection provided by enclosures (IP code)
Function EXTRA ETECH ESPECIAL EBASE
Voltage VDC
(Ri „d 9 MƒÇ) . . . .
Voltage VAC TRMS
(Ri „d 9 MƒÇ) . . . .
Voltage Lo1) VAC TRMS
(Ri ƒ­ƒn1 MƒÇ) . . . ¡X
Voltage VAC+DC TRMS
(Ri „dƒn9 MƒÇ) . . . .
Frequency Hz @ VAC bzw.
@ Lo 1) VAC
.. 300 kHz .. 300 kHz .. 300 kHz .. 300 kHz
Low-pass filter 1 kHz @ VAC / @ LoVAC ¡X
Bandwidth @ VAC+DC bzw. VAC 50 kHz 20 kHz 1 kHz
Frequency MHz @ 5V TTL 0.1 Hz..1 MHz ¡X ¡X ¡X
Duty cycle % 2.0 % .. 98 % ¡X ¡X ¡X
Voltage level measurement dB . . . .
Resistance Ă . . . .
Continuity test
@ICONST = 1 mA . . . .
Diode measurement
@ICONST = 1 mA . . . .
Temperature measurement
„aC/„aF @TC
Typ K
Temperature measurement
„aC/„aF RTD
Pt100/Pt1000 ¡X ¡X
Capacitance measurement F . . ¡X ¡X
Current ADC 600 ƒÝA/6 mA
60 mA/600 mA
6 A/10 A (16 A)
60 mA/600 mA
Current AAC+DC TRMS 6 A/10 A (16 A) 6 A/10 A (16 A) A
Current AAC TRMS
Bandwidth @ AAC+DC bzw. AAC 10 kHz ¡X
Frequency Hz @ AAC .. 60 kHz ¡X
Measurement with clamp ammeter
with adjustable transfer factor
mV / A
mA / A
mV / A
A / A
mV / A
¡X
Data logger function 2)
(memory) 8 Mbit ¡X ¡X ¡X
Relative value measurement ƒ´REL . . . .
Zero point ZERO . . . .
MIN/MAX/DATA Hold . . . .
IR-interface (38.4 kBd) . . . .
Power pack connector socket . ¡X ¡X ¡X
Protective rubber holster . . . .
Fuse 10 A / 1000 V 10 A / 1000 V ¡X ¡X
Protection 3) IP52 IP52 IP52 IP52
Measuring category 1000 V CAT III
600 V CAT IV 600 V CAT II 1000 V CAT III
600 V CAT IV
Calibration DKD DKD DKD DKD
GMC-I Messtechnik GmbH 3
METRAHIT„nEXTRA„nETECH„nESPECIAL„nEBASE
TRMS Digital Multimeters
Specifications
1) Specified accuracy is valid as of 3% of the measuring range.
With short-circuited test probes: residual value of 1 to 30 d at zero point due to the TRMS
converter (exception: mV AC range, 60 counts). See frequency influence on page 4.
2) At 0 „a .. + 40ƒn„aC
3) Displays up to max. 6.0 V, ¡§OL¡¨ in excess of 6.0 V.
4) Applies to measurements at film capacitors
5) Lowest measurable frequency for sinusoidal measuring signals symmetrical to the zero point
6) Overload capacity of the voltage measurement input:
power limiting: frequency x voltage max. 6 x 106 V x Hz for U > 100 V
7) Overload capacity of the current measurement input:
See current measuring ranges for maximum current values.
8) Input sensitivity, sinusoidal signal, 10% to 100% of the measuring range
9) Plus sensor deviation
10) Off-time > 30 min and TA „T 40 ¢XC
*) without ZERO max. „b 15 digit
Key:
d = counts, R = measuring range, rdg. = measured value (reading)
Meas.
Function Measuring Range
Resolution at Upper
Range Limit Input Impedance
Intrinsic Uncertainty under Reference Conditions for High Resol 59999 counts
Overload Capacity 2)
„b(.. % rdg. + .. d) „b(.. % rdg. + .. d) „b(.. % rdg. + .. d)
59 999 5999 ~ / ~ 1) 1) Value Time
V
600 mV 10 ƒÝV 100 ƒÝV „dƒn9 MƒÇ „d9 MƒÇ // < 50 pF 0.09 + 5 with ZERO *) 0.5 + 30 1 + 30 1000 V
DC
AC
RMS
Sine
continous
6 V 100 ƒÝV 1mV „d 9 MƒÇ „d9 MƒÇ // < 50 pF 0.05 + 5 0.5 + 9 1 + 30
60 V 1 mV 10 mV „d 9 MƒÇ „d9 MƒÇ // < 50 pF 0.05 + 5 0.5 + 9 1 + 30
600 V 10 mV 100 mV „dƒn9 MƒÇ „d9 MƒÇ // < 50 pF 0.05 + 5 0.5 + 9 1 + 30
1000 V 100 mV 1 V „dƒn9 MƒÇ „d9 MƒÇ // < 50 pF 0.09 + 5 0.5 + 9 1 + 30
Display range for reference voltage
UREF = 0.775 V Intrinsic UncertaintyGmc-i Messtechnik Port Devices Driver
dB
600 mV~
0.01 dB
¡V48 dB .. ¡V2 dB
0.1 dB (U > 10 % MB)
1000 V
DC
AC
RMS
Sine
continous
6 V~ ¡V28 dB .. +18 dB
60 V~ ¡V8 dB .. +38 dB
600 V~ +2 dB .. +58 dB
1000 V~ +22 dB .. +63 dB
Voltage drop, approx. at upper range limit ~ 1) 1)
A
600 ƒÝA 10 nA 100 nA 150 mV 150 mV 0.5 + 5 with ZERO *) 1 + 10 1.5 + 30
0.7 A continous
6 mA 100 nA 1 ƒÝA 200 mV 200 mV 0.5 + 5 1 + 10 1.5 + 30
60 mA 1 ƒÝA 10 ƒÝA 200 mV 200 mV 0.1 + 5 1 + 10 1.5 + 30
600 mA 10 ƒÝA 100 ƒÝA 300 mV 300 mV 0.2 + 5 1 + 10 1.5 + 30
6 A 100 ƒÝA 1 mA 300 mV 300 mV 0.9 + 10 1 + 10 1.5 + 30 10 A: „T 5 min 10)
10 A 1 mA 10 mA 600 mV 600 mV 0.9 + 10 1.5 + 10 1.5 + 30 16 A: „T 30 s 10)
Factor 1:1/10/100/1000 Input Input impedance
A
0.06/0.6/6/60 A 60 mA EXTRA / ESPECIAL / ETECH
Current measuring input
(A socket )
Specification see current ranges A~
Measuring input
0.6/6/60/600 A 600 mA 0.7 A continous
6/60/600/6 000 A 6 A plus clamp current transformer error 10 A: 5 min
A 0.6/6/60/600 A
6/60/600/6000 A
600 mV
6 V
EXTRA / ESPECIAL / Voltage measurement input
ETECH: (V socket ) Ri =1 MĂ/9 MĂ
Specification see voltage measuring ranges V~ 1) Measuring input
EBASE: (V socket ) Ri ~1 MƒÇ „b(0.5% rdg. + 10 d) „b(1% rdg. + 30 d) „b(1.5% rdg. + 30 d) 1000 V RMS
plus clamp current sensor error max. 10 s
Open-circuit voltage Meas. curr. @ range limit „b(.. % rdg. + .. d)
Ă
600 ƒÇ 10 mƒÇ 100mƒÇ < 1.4 V approx. 250 ƒÝA 0.1 + 5 with active ZERO function*)
1000 V
DC
AC
RMS
Sine
max. 10 s
6 kƒÇ 100 mƒÇ 1 ƒÇ < 1.4 V approx. 65 ƒÝA 0.1 + 5
60 kƒÇ 1 ƒÇ 10 ƒÇ < 1.4 V approx. 7.5 ƒÝA 0.1 + 5
600 kƒÇ 10 ƒÇ 100 ƒÇ < 1.4 V approx. 0.75 ƒÝA 0.2 + 5 ..
6 MƒÇ 100 ƒÇ 1 kƒÇ < 1.4 V approx. 0.1 ƒÝA 0.5 + 5
60 MĂ 1 kĂ 10 kĂ < 1.4 V approx. 30 nA 5 + 10
600 ƒÇ ¡X 0.1 ƒÇ approx. 9 V approx. 1 mA const. 3 + 5
6.0 V 3) ¡X 1 mV approx. 9 V approx. 1 mA const. 0.5 + 3
Discharge resist. U0 max „b(.. % rdg. + .. d)
F
EXTRA
ETECH
60 nF ¡X 10 pF 10 MƒÇ 0.7 V 1 + 104) with active ZERO function *) 1000 V
DC
AC
RMS
Sine
max. 10 s
600 nF ¡X 100 pF 1 MƒÇ 0.7 V 1 + 6 4)
6 ƒÝF ¡X 1 nF 100 kƒÇ 0.7 V 1 + 6 4)
60 ƒÝF ¡X 10 nF 12 kƒÇ 0.7 V 1 + 6 4)
600 ƒÝF ¡X 100 nF 3 kƒÇ 0.7 V 5 + 6 4)
fmin 5) „b(.. % rdg. + .. d)
Hz (V)
Hz (A)
Hz (A )
600.00 Hz 0.01 Hz 0.1 Hz
1 Hz
0.05 + 5 8)
Hz (V) 6):
Hz(A )6):
1000 V
Hz (A): 7)
max. 10 s
6.0000 kHz 0.1 Hz 1 Hz
60.000 kHz 1 Hz 10 Hz
Hz (V) 300.00 kHz 10 Hz 100 Hz 10 Hz
MHz
EXTRA
600 Hz .. 1 MHz
0.01 ..
100 Hz
0.1 ..
1 kHz
1 .. 100 Hz 0.05 + 5 > 2 V .. 5 V
1000 V max. 10 s %
EXTRA
2.0 .. 98 % ¡X 0.01 % 15 Hz .. 1 kHz 1 Hz 0.1 R + 5 d > 2 V .. 5 V
5.0 .. 95 % ¡X 0.01 % .. 10 kHz 1 Hz
0.2 R per kHz
+ 5 d
> 2 V .. 5 V
10.. 90 % ¡X 0.01 % .. 50 kHz 1 Hz
0.5 R per kHz
+ 5 d
> 2 V .. 5 V
„b(.. % rdg. + .. d)
„aC/„aF
Pt 100 ¡V 200.0 ..
+850.0 „aC
0.1 „aC
0.3 + 15 9)
1000 V
DC/AC
RMS
Sine
Pt 1000 ¡V 150.0 .. max. 10 s
+850.0 „aC 0.3 + 15 9)
K
(NiCr-Ni)
¡V 250.0 ..
+1372.0 „aC 1% + 5 K 9)
EXTRA
ESPECIAL
ETECH
METRAHIT„nEXTRA„nETECH„nESPECIAL„nEBASE
TRMS Digital Multimeters
4 GMC-I Messtechnik GmbH
Internal Clock
Time format DD.MM.YYYY hh:mm:ss
Resolution 0.1 s
Accuracy „b1 min. per month
Temperature Influence 50 ppm/K
Influencing Quantities and Influence Error
1) With zero balancing
2) Power limiting: frequency x voltage max. 6 x 106 V x Hz for U > 100 V
3) The accuracy specification for frequency response is valid within a display value
range of 10% to 100% of the measuring range for both measuring modes with the
TRMS converter in the AC and (AC+DC) ranges.
4) METRAHIT EXTRA: frequency response up to 20 kHz,
METRAHIT ETECH: frequency response up to 10 kHz,
METRAHIT ESPECIAL: frequency response up to 10 kHz,
METRAHIT EBASE: frequency response up to 1 kHz
5) Except for sinusoidal waveshape
Reference Conditions
Ambient temperature +23 „aC „b2 K
Relative humidity 40 .. 75%
Measured qty. frequency 45 .. 65 Hz
Measured qty. waveform Sine
Battery voltage 3 V „b0.1 V
Response Time (after manual range selection)
Data Interface
Type Optical via infrared light through the housing
Data transmission Serial, bidirectional (not IrDa compatible)
Protocol Device specific
Baud rate 38,400 baud
Functions ¡V Select/query measuring functions
and parameters
¡V Query momentary measurement data
¡V Read out stored measurement data
The USB X-TRA plug-in interface adapter (see accessories) is
used for connection to the PC¡¦s USB port.
Internal Measured Value Storage
(METRAHIT EXTRA only)
Memory capacity 16 MBit / 2 MB for approx. 60,000
measured values with date and time stamp
Influencing
Quantity
Sphere of
Influence
Measured Quantity /
Measuring Range 1)
Influence Error
(..% rdg. + .. d) / 10 K
Temperature
¡V10 „aC .. +21 „aC
und
+25 „aCƒn.. +40 „aC
V 0.2 + 10
V 0.4 + 10
600 Ă .. 6 MĂ 0.5 + 10
> 6 MĂ 1 + 10
mA/A 0.5 + 10
mA/A 0.8 + 10
60 nF .. 600 ƒÝF 1 + 5
Hz, dB 0.2 + 10
„aC/„aF (Pt100/Pt1000) 0.5 + 10
„aC/„aF thermocouple K 0.2 + 10
Influencing
Qty.
Meas. Qty. /
Meas. Range Sphere of Influence
Intrinsic Uncertainty 3)
„bƒv .. % rdg. + .. d)
METRAHIT EXTRA
METRAHIT ETECH
METRAHIT ESPECIAL
METRAHIT EBASE
Frequency
VAC
600.00 mV
> 15 Hz .. 45 Hz 3 + 30 3 + 30
> 65 Hz .. 1 kHz 2 + 30 3 + 30
> 1 kHz .. 20 kHz 3 + 30 ¡X
6.0000 V
..
600.00 V 2)
> 15 Hz .. 45 Hz 2 + 9 3 + 9
> 65 Hz .. 1 kHz 1 + 9 3 + 9
> 1 kHz .. 20 kHz 4) 3 + 9 ¡X
> 20 kHz .. 50 kHz 4) 7 + 9 ¡X
1000.0 V 2)
> 15 Hz .. 45 Hz 2 + 9 3 + 9
> 65 Hz .. 1 kHz 2 + 9 3 + 9
> 1 kHz .. 10 kHz 3 + 30 ¡X
AAC
600.00 ƒÝA
..
10.0000 A
> 15 Hz .. 45 Hz
3 + 10 ¡X
> 65 Hz .. 10 kHz
AAC
EBASE
600 mV /
6V /
> 65 Hz .. 1 kHz ¡X 3 + 30
Influencing
Quantity
Sphere of
Influence
Measured Quantity/
Measuring Range Influence Error 5)
Crest factor CF
1 .. 3
V , A
„b 1 % rdg.
> 3 .. 5 „b 3 % rdg.
Influencing
Quantity
Sphere of
Influence Measured Quantity Influence Error
Relative
humidity
75%
3 days
instrument off
Vƒz A, ƒÇ, F, Hz, dB, „aC 1 x intrinsic uncertainty
Battery voltage 1.8 to 3.6 V Vƒz A, ƒÇ, F, Hz, dB, „aC Included in intrinsic uncertainty
Influencing
Quantity Sphere of Influence Measured Quantity /
Measuring Range Damping
Common Mode
Interference
Voltage
Interference quantity max. 1000 V V > 120 dB
Interference quantity max. 1000 V
50 Hz .. 60 Hz, sine
6 V , 60 V > 80 dB
600 V > 70 dB
1000 V > 60 dB
Series Mode
Interference
Voltage
Interference quantity: V , respective
nominal value of the measuring range,
max. 1000 V , 50 Hz .. 60 Hz, sine
V > 50 dB
Interference quantity max. 1000 V V > 110 dB
Measured Quantity /
Measuring Range
Response Time
Digital Display
Measured Quantity
waveshape
V , V , dB
AV , A 1.5 s From 0 auf 80 %
of upper range limit value
600 Ă .. 6 MĂ 2 s
From „V auf 50 %
of upper range limit value
60 MĂ 5 s
Continuity < 50 ms
„aC (Pt 100) Max. 3 s
1.5 s
60 nF .. 600 ƒÝF Max. 2 s From 0 auf 50 %
>10 Hz 1.5 s of upper range limit value
GMC-I Messtechnik GmbH 5
METRAHIT„nEXTRA„nETECH„nESPECIAL„nEBASE
TRMS Digital Multimeters
Power Supply
Battery 2 ea. 1.5 V mignon cell (2 ea. size AA),
alkaline manganese per IEC LR6
(2 ea. 1.2 V NiMH rechargeable battery
also possible)
Service life with alkaline manganese: approx. 200
hours
Battery test Battery capacity display with battery
symbol in 4 segments: .
Querying of momentary battery voltage via
menu function.
Power OFF function Multimeter is switched off automatically:
¡V If battery voltage drops to below prox. 1.8 V
¡V If none of the keys or the rotary switch
are activated for an adjustable duration
of 10 to 59 minutes, and the multimeter
is not in the continuous operation mode
Power pack socket
(METRAHIT EXTRA) If the NA X-TRA power pack has been
plugged into the instrument, the batteries
are disconnected automatically.
Rechargeable batteries can only be
recharged externally.
Display
LCD panel (65 mm x 36 mm) with analog and digital display including
unit of measure, type of current and various special functions
Background illumination
Background illumination is switched off approximately 1 minute
after it has been activated.
Analog
Display LCD scale with bar graph or pointer, depending
on the selected parameter setting
Scaling With 4 division lines each, 1 bar/pointer corresponds
to 500 counts at the digital display
Polarity display With automatic switching
Overflow display With the symbol
Measuring rate 40 measurements per second and display
refresh
Digital
Display / char. height 7-segment characters / 15 mm
Resolution 59,999 counts
Overflow display ¡§OL¡¨ is displayed for „dƒn60,000 counts
Polarity display ¡§¡V¡¨ (minus sign) is displayed
if plus pole is connected to ¡§ƒÎ¡¨
Measuring rate 10 or 40 measurements per second with
the Min-Max function except for the
capacitance, frequency and duty cycle
measuring functions
Refresh rate 2 times per sec., every 500 ms
Acoustic Signals
For voltage Intermittent signal at above 1000 V
For current Intermittent signal at above 10 A
continuous signal at above 16 A
Fuse for METRAHIT EXTRA, METRAHIT ETECH
Fuse FF (UR) 10 A/1000 V AC/DC;
10 mm x 38 mm,
Switching capacity: 30 kA at 1000 V AC/
DC, protects the current measurement
input in the 600 ƒÝA through 10 A ranges
Electrical Safety
Per IEC 61010-1:2001/VDE 0411-1:2002
METRAHIT EXTRA, METRAHIT ETECH, METRAHIT EBASE
Safety class II
Measuring category III IV
Operating voltage 1000 V 600 V
Pollution degree 2
Test voltage 6.7 kV~
METRAHIT ESPECIAL .for Current Transformers¡§
Special device for measurements at current transformers without
fuse in the electrical circuit
Safety class II
Measuring category 600 V CAT II
Pollution degree 2
Test voltage 3.5 kV~
Electromagnetic Compatibility (EMC)
Interference emission EN 610326-1: 2006, class B
Interference immunity EN 610326-1: 2006
Ambient Conditions
Accuracy range 0 „aC .. +40 „aC
Operating temp. range ƒ{10ƒn„aC .. +50ƒn„aC
Storage temp. range ƒ{25ƒn„aC .. +70ƒn„aC (without batteries)
Relative humidity Max.75%, no condensation allowed
Elevation To 2000 m
Deployment Indoors, except within specified ambient
conditions
Mechanical Design
Housing Impact resistant plastic (ABS)
Dimensions 200 x 87 x 45 mm
(without protective rubber holster)
Weight Approx. 0.35 kg with batteries
Protection Housing: IP 52 (pressure equalization by
means of the housing)
Table excerpt regarding significance of the
IP code
IP XY
(1st digit X)
Protection against penetration
of solid particles
IP XY
(2nd digit Y)
Protection against
penetration by water
5 Dust protected 2 Dripping (15„a inclination)
METRAHIT„nEXTRA„nETECH„nESPECIAL„nEBASE
TRMS Digital Multimeters
6 GMC-I Messtechnik GmbH
Accessories for Operation at a PC
Interface Adapter for USB Connection
The following functions can be executed with the USB X-TRA
bidirectional interface adapter:
¡E Configure the METRAHIT Multimeter from a PC.
¡E Transmit live measurement data to the PC.
¡E Read out data from memory at the METRAHIT EXTRA.
The adapter does not require a separate power supply.
Its baud rate is 38,400 baud.
A CD ROM is included which contains current drivers for
Windows operating systems.
METRAwin„µ10/METRAHit„µ Software
METRAwin„µ10/METRAHit„µ PC software is a multilingual, measurement
data logging program for recording, visualizing and documenting
measured values of multimeters of the METRAHIT e-series.
Communication between the PC and the measuring instrument(s)
is established via available interface adapters.
Depending upon device type, one or several of the following operating
modes are possible:
¡E Device Configuration
Remote configuration and querying of device-specific functions
and parameters, for example measuring function, measuring
range and memory parameters. Frequently used device settings
can be saved to configuration files for easy recall.
¡E Online Recording of Measurement Data
Read-in, display and recording of momentarily measured data
from the interconnected device.
¡V Number of
measuring channels up to10
¡V Start recording manual, triggered by measured value, time
triggered
¡V Recording mode > time controlled
with sampling interval of 0.05 s* .. 1 s ..
60 min
> manually controlled
> measured value controlled in event
of exceeded limit/delta value
¡V Recording duration max. 10 million intervals
* Depending upon device type, measuring function, number of measuring channels
and communication (e.g. via modem), sample intervals of less than 1 s cannot be
used.
¡E Reading Out and Visualizing Stored Data
If supported by the device: read-in and display of offline data
recorded to device memory.
For purposes of analysis, data recorded online or read in from the
device¡¦s memory can be displayed in various formats:
System Requirements
METRAwin 10 (as from version 5.3) can be run on IBM compatible
PCs with Microsoft WindowsR 98, ME, NT 4.0, 2000, XP or VISTA.
Y(t)-recorder display
for up to 6 channels
XY-recorder display
for up to 4 channels
Multimeter-display
for up to 4 channels
Tabular display
for up to 10 channels
GMC-I Messtechnik GmbH 7
METRAHIT„nEXTRA„nETECH„nESPECIAL„nEBASE
TRMS Digital Multimeters
Order Information Transport Accessories
F836 Ever-Ready Case
For multimeter (without protective rubber holster) and accessories
For additional information regarding accessories please refer to:
¡E our Measuring Instruments and Testers catalog.
¡E our website www.gossenmetrawatt.com
Designation Type Article Number
METRAHIT EXTRA, METRAHIT ETECH, METRAHIT ESPECIAL and METRAHIT EBASE Multimeters
60,000 counts TRMS multimeter with direct, alternating and pulsating voltage measurement
(TRMS values), frequency measurement, resistance measurement, continuity test,
diode measurement andtemperature measurement with type K thermocouples
LCD with 15 mm characters, analog bar graph and background illumination
Measuring categories: 600 V/CAT IV, 1000 V/CAT III
Current measurement via clamp sensors with voltage output and adjustable
clamp factor
All multimeters include the KS17-2 measurement cable set, two mignon batteries,
condensed operating instructions, CD ROM, DKD calibration certificate, hard case HC20
Same as above but with direct, alternating
and pulsating current measurement
(TRMS values), additional broad
range capacitance measurement, precision
temperature measurement with
Pt100 or Pt1000 platinum resistance
thermometers, frequency and keying
ratio measurement, clamp current
transformer with current output, with
power pack socket and IR interface,
4 MB data memory, protective rubber
holster METRAHIT EXTRA M250A
Same as above but with direct, alternating
and pulsating current measurement
(TRMS values), additional broad
range capacitance measurement,
with additional current measurement
via clamp current transformer with current
output METRAHIT ETECH M253A
Same as above
Special device without integrated fuse
for use in current transformer circuits METRAHIT ESPECIAL M252A
Same as above but with current measurement
via clamp current sensor with
voltage output (see accessories) instead
of direct current measurement, and adjustable
transformation factors. METRAHIT EBASE M251A
Gmc-i messtechnik port devices drivers Accessories for operation at a PC
IR-USB bidirectional interface adapter USB X-TRA Z216C
METRAwin 10 software METRAwin 10 GTZ3240000R0001
Accessories for temp. measurement with resistance thermometer
(METRAHIT EXTRA only)
Pt100 temperature sensor for
surface and immersion measurement,
-40 to +600ƒn„aC Z3409 GTZ3409000R0001
Pt1000 temperature sensor for
measurement in gases and liquids,
-50 to +220ƒn„aC TF220 Z102A
Pt100 oven sensor, -50 to +550ƒn„aC TF550 GTZ3408000R0001
Ten adhesive Pt100 temperature
sensors, -50 to +550ƒn„aC TS Chipset GTZ3406000R0001
Replacement fuse (METRAHIT EXTRA and METRAHIT ETECH only)
Fuses (pack of 10) FF (UR) 10 A /
1000 V AC/DC Z109L
Power pack (for METRAHIT EXTRA only) NA X-TRA Z218G
Protective rubber holster and carrying
strap GH X-TRA Z104C
Designation Type Article Number
Imitation leather without protective
rubber holster for METRA HIT„n and
METRAmax F829 GTZ3301000R0003
Cordura belt pouch for METRA HIT„n
multimeters and METRAport HitBag Z115A
Imitation leather ever-ready case with
cable compartment F836 GTZ3302000R0001
Ever-ready case for 2 METRA HIT„n,
2 adapters and accessories F840 GTZ3302001R0001
Hard case for one METRA HIT„n and
accessories HC20 Z113A
Hard case for two METRA HIT„n and
accessories HC30 Z113A
HC30 Hard Case
For two multimeters (with/without
protective rubber holster)
and accessories
HitBag Cordura Belt Pouch
For METRA HIT„n multimeters
(with/without protective rubber
holster) and METRAport
F829 Carrying Pouch
For multimeters (with/without
protective rubber holster)
and accessories
METRAHIT„nEXTRA„nETECH„nESPECIAL„nEBASE
TRMS Digital Multimeters
Prepared in Germany ¡E Subject to change without notice ¡E PDF version available on the Internet
GMC-I Messtechnik GmbH
Sudwestpark 15
90449 Nurnberg ¡E Germany
Phone +49 911 8602-111
Fax +49 911 8602-777
E-Mail info@gossenmetrawatt.com
www.gossenmetrawatt.com
¡´ with adjustable transformation factor 1: 1 / 10 / 100 / 1000
Current Measuring Accessories Suitable for
METRA HIT„n
All current sensors and transformers are equipped with a terminal with 4 mm safety banana plugs
Type Designation Measuring Range Meas.
Category
Max.
Wire Dia.ƒn
Transformation
Factor
Frequency
Range
Intrinsic
Uncertainty
¡Ó(% rdg. + ..)
Article
Number
EBASE ETECH
EXTRA
ESPECIAL
DC/AC Current Sensors with Voltage Output
Z201A DC/AC clamp current sensor,
with battery mode (30 h)
0.01 .. 20 A~/30 A¡V 300 V
CAT III
19 mm 100 mV/A DC .. 400 Hz
.. 20 kHz
1% + 0.002 A Z201A ¡´ ¡´
Z202A DC/AC clamp current sensor,
with 2 measuring ranges,
battery mode (50 h)
0.1 .. 20 A~/30 A¡V;
1 .. 200 A~/300 A¡V
300 V
CAT III
19 mm 10 mV/A,
1 mV/A
DC .. 2 kHz
.. 10 kHz
1% + 0.03 A,
1% + 0.3 A
Z202A ¡´ ¡´

Gmc-i Messtechnik Port Devices Driver Free


Z203A DC/AC clamp current sensor,
with 2 measuring ranges,
battery mode (50 h)
1 .. 200 A~/300 A¡V;
1 .. 1000 A~/A¡V
300 V
CAT III
31 mm 1 mV/A DC ..10 kHz 1% +0.5 A Z203A ¡´ ¡´
Z13B DC/AC clamp current sensor,
with 2 measuring ranges,
battery mode (50 h)
0.2 .. 40 A~/60 A¡V;
0.5 .. 400 A~/600A¡V
300 V
CAT IV
50 mm 10 mV/A,
1 mV/A
DC .. 65 Hz
.. 10 kHz
1.5% + 0.5 A
2.5%
Z13B ¡´ ¡´
AC Current Sensors with Voltage Output
WZ12B AC clamp current sensor 10 mA~ .. 100 A~ 300 V

Gmc-i Messtechnik Port Devices Driver Tp-link


CAT III
15 mm 100 mV/A 45 .. 65
.. 500 Hz
1.5% +0.1 mA Z219B ¡´ ¡´
WZ12C AC clamp current sensor,
with 2 measuring ranges
1 mA~ .. 15 A~,
1 .. 150 A~
300 V
CAT III
15 mm 1 mV/mA,
1 mV/A
45 .. 65
.. 400 Hz
3% + 0.15 mA,
2% + 0.1 A
Z219C ¡´ ¡´
WZ11B AC clamp current sensor,
with 2 measuring ranges
0.5 .. 20 A~,
5 .. 200 A~
600 V
CAT III
20 mm 100 mV/A,
10 mV/A
30..48 .. 65
.. 500 Hz
1 .. 3% Z208B ¡´ ¡´
Z3512A AC clamp current sensor,
with 4 measuring ranges
1 mA .. 1/10/100/
1000 A~
600 V
CAT III
52 mm 1 V/A, 100 mV/A,
10 mV/A, 1 mV/A
10..48 .. 65
.. 3 kHz
0.5 .. 3%,
0.2 .. 1%
Z225A ¡´ ¡´
AF033A AmpFLEX flexible AC
current sensor with 2 measuring
ranges, battery (150 h)
5 .. 30 A~,
5 .. 300 A~
1000 V
CAT III
Length:
600 mm
100 mV/A,
10 mV/A
10 ..100 Hz
.. 20 kHz
1% + 0.5 A,
1% +0.5 A
Z207A ¡´ ¡´
AF11A AmpFLEX flexible AC current
sensor, battery (150 h)
5 .. 1000 A~ 1000 V
CAT III
Length:
450 mm
1 mV/A 10 ..100 Hz
.. 20 kHz
1% + 2 A Z207D ¡´ ¡´
AF33A AmpFLEX flexible AC current
sensor with 2 measuring
ranges, battery (150 h)
5 .. 300 A~,
5 .. 3000 A~
1000 V
CAT III
Length:
900 mm
10 mV/A,
1 mV/A
10 ..100 Hz
.. 20 kHz
1% + 0.5 A,
1% + 2 A
Z207B ¡´ ¡´
AF101A AmpFLEX flexible AC current
sensor with 2 measuring
ranges, battery (150 h)
5 A~.. 1 k A~,
50 A~.. 10 k A~
1000 V
CAT III
Length:
1200 mm
1 mV/A,
0.1 mV/A
10 ..100 Hz
.. 20 kHz
1% + 2 A,
1% + 10 A
Z207C ¡´ ¡´
AC Current Transformer with Current Output
WZ12A AC clamp current transformer 15 .. 180 A~ 300 V
CAT III
15 mm 1 mA/A 45 .. 65
.. 400 Hz
3% Z219A ¡X ¡´
WZ12D AC clamp current transformer 30 mA .. 150 A~ 300 V
CAT III
15 mm 1 mA/A 45 .. 65
.. 500 Hz
2.5% +0.1 mA Z219D ¡X ¡´
WZ11A AC clamp current transformer 1 .. 200 A~ 600 V
CAT III
20 mm 1 mA/A 48 .. 65
.. 400 Hz
1 .. 3% Z208A ¡X ¡´
Z3511 AC clamp current transformer 4 .. 500 A~ 600 V
CAT III
30 x 63Driver
mm
1 mA/A 48 .. 65
.. 1 kHz
3% +0.4 A GTZ 3511
000 R0001
¡X ¡´
Z3512 AC clamp current transformer 0.5 .. 1000 A~ 600 V
CAT III
52 mm 1 mA/A 30..48 .. 65
.. 5 kHz
0.5% .. 0.7% GTZ 3512
000 R0001
¡X ¡´
Z3514 AC clamp current transformer 1 .. 2000 A ~ 600 V
CAT III
64 x 150
mm
1 mA/A 30..48 .. 65
.. 5 kHz
0.5% +0.1 A GTZ 3514
000 R0001
¡X ¡´
Shunt Resistors for Multimeters without Current Measuring Function
NW300
mA
Plug-in shunt resistor,
encapsulated
0 .. 300 mA 300 V
CAT III
¡X 1 mV/mA DC ..10 kHz 0.5% Z205C ¡´ ¡´
NW3A Plug-in shunt resistor,
encapsulated
0 .. 3 A 300 V
CAT III
¡X 100 mV/A DC ..10 kHz 0.5% Z205B ¡´ ¡´. Flash-Application made by Eckstein Product Design - epd http://www.eckstein-design.com Flash-Application made by Michael Kuphal, Flash Design München http://www.michaelkuphal.de Flash München